Reclaimed Wood Beam Wraps in Los Angeles

A beam wrap covers a steel, LVL or plain wood beam with real reclaimed wood, so it looks like a solid old timber. The structural beam stays in place and keeps doing its job; the wrap is decorative. Legno Hardwood makes every wrap to fit your beam, in any surface and color, for homes and businesses across Southern California, and we ship to other states.

Call (213) 715-5197 or send us your beam sizes.

Part of our reclaimed wood box beams and ceiling beams.

How a beam wrap is installed: existing steel beam, wood blocking fastened to the beam, reclaimed wood wrap fastened to the blocking, finished beam

How a beam wrap is installed

  1. Your beam stays. Steel I-beam, LVL, glulam or a plain wood beam. Nothing structural is changed.
  2. Wood blocking first. We fasten wood blocking to the sides and bottom of the beam, so the wrap has solid wood to hold on to. On a steel beam this is the step that makes the wrap tight and straight.
  3. The wrap goes up. The hollow reclaimed wood wrap, built in our shop to your sizes, goes around the beam and is fastened to the blocking.
  4. Finished on site. Corners and ends are fitted on site, so the beam looks like one solid piece of old wood.
Legno crew fastening a reclaimed wood box beam to the wood blocking through the side

Which beams can be wrapped

  • Steel I-beams and steel posts
  • LVL and glulam beams
  • Plain lumber or painted wood beams
  • Beams over kitchens, openings and great rooms
  • Posts, so they match the beams

Why wrap a beam

  • Hide the steel and keep the structure
  • Real reclaimed wood, not foam or faux wood
  • Light: a hollow wrap adds little weight
  • Matches the room: same wood as your floors, mantel or new box beams
  • Made to fit your beam, not a standard size

Want new beams too? See reclaimed wood box beams and ceiling beams.

Choose a surface

Every wrap is made from real reclaimed wood. See each surface up close: Hand hewn · Rough sawn · Smooth planed · Wire brushed · Hit or miss · Resawn · Weathered grey.

Box beam surfaces on real Legno reclaimed wood samples: hand hewn, rough sawn, smooth planed, wire brushed and hit or miss

Colors for beam wraps

There is no limit on color. Pick a finish below, or send us a floor board, a cabinet door or a photo and we make that color.

Light & whitewash: Whitewashed Hand Sculpted, Vanilla Classic, Douglas Fir Light Grey, Driftwood, Reclaimed Oak Natural · Grey: Hit or Miss Grey Sky, Euro Silver, Driftwood Grey, Douglas Fir Dark Grey, Euro Pewter · Honey & natural: Heart Pine Fresh Sails, Douglas Fir Skip Plane, Douglas Fir Oil, Hand Scraped Douglas Fir, Earthtone Oak · Brown: Spice Oak, Mixed Oak Sienna, Walnut Antique Brown, Coffee Hand Scraped, Stained Ebony Oak · Dark: Chestnut Dark Oil, Walnut with Ebony

How to measure your beam

For each beam, send the width and height in inches and the length in feet, plus a close photo of where the beam meets the wall or post. If there are posts, measure those too. See our step by step guide on how to measure for box beams.

Box beam order guide: 3-sided, 2-sided and 4-sided box beams, how to measure width, height and length, and how they are installed

Made in our shop, installed by our crew

Every wrap is built to order in our shop, then delivered, shipped or installed by our own crew.

Beam wrap quote form

Choose "Existing beams to wrap" under ceiling type, and add your beam sizes and photos. Not sure? Choose "Not sure" and we help you plan.








































Beam wrap FAQ

What is a beam wrap?

A hollow cover made of real reclaimed wood that fits around an existing beam, so a steel, LVL or plain wood beam looks like a solid old timber.

Can you wrap a steel I-beam?

Yes. We fasten wood blocking to the steel beam first, then install the reclaimed wood wrap over it and fasten it to the blocking.

Why is wood blocking needed?

The wrap needs solid wood to be fastened to. Blocking on the sides and bottom of the beam holds the wrap tight, straight and centered.

Does a beam wrap change the structure?

No. The existing beam stays in place and keeps carrying the load. The wrap is decorative.

Is the wrap real wood?

Yes. Every wrap is made from real reclaimed wood, with its grain, knots, nail holes and old color.

Which surfaces are available?

Hand hewn, rough sawn, smooth planed, wire brushed, hit or miss and resawn.

What colors are available?

Any color. Choose a finish from the chart, or we match your floor, cabinets or a photo.

Can posts be wrapped too?

Yes. Posts can be wrapped in the same wood and finish, so they match the beams.

Can lights or wiring go inside?

There is room for wiring in many wraps. Tell us what you need when you ask for a quote.

How do I measure my beam?

Width and height in inches, length in feet, plus a close photo where the beam meets the wall or post.

Do you install the wraps?

Installation is available on request. Tell us when you ask for a quote.

Do you ship outside California?

Yes. We deliver across Southern California and ship to other states.

How do I get a quote?

Call (213) 715-5197 or fill in the beam wrap quote form on this page.

Ready to wrap your beams?

Send us the beam sizes and photos. Call (213) 715-5197 or use the form.

Beam surfaces: Hand hewn · Rough sawn · Smooth planed · Wire brushed · Hit or miss · Resawn · Weathered grey

Guide: how to measure for box beams · See all reclaimed wood box beams and ceiling beams.

Also: Reclaimed wood fireplace mantels

More beam guides

What is a box beam · Rough sawn vs hand hewn beams · Solid reclaimed wood beams

Box beams by color: Whitewash · Grey · Natural · Brown · Dark (hand hewn; each page links to the other surfaces).