Wire Brushed Box Beams in Los Angeles

Wire brushed box beams start smooth, then a wire brush machine opens the grain. The soft wood between the growth rings is brushed out, so you can see and feel the grain on every face. Legno Hardwood makes them to order from real reclaimed wood, in your size and any color, for homes across Southern California, and we ship to other states.

Call (213) 715-5197 or request a beam quote.

Part of our reclaimed wood box beams and ceiling beams.

Wire brushed wood beams on a vaulted tongue and groove wood ceiling with recessed lights

What a wire brushed beam looks like

We plane each reclaimed board flat, the same as a smooth planed beam. Then we run it through a wire brush machine. The brush takes out the soft early wood and leaves the hard grain lines standing, so the face gets a fine, raised texture.

The beam still looks clean from across the room, but up close the grain stands out and catches the light. Stain settles into the brushed grain, so the color looks deeper and richer. We build it as a hollow box beam, so it looks like a solid timber without the weight.

  • Smooth face with the grain raised: you can feel it with your hand
  • Clean but not flat: between smooth planed and rough sawn
  • Deeper color: stain settles into the brushed grain
  • Made to order to your width, height and length
Legno crew fitting a wire brushed oak box beam tight to the ceiling

Where wire brushed beams look best

  • Tongue and groove and wood plank ceilings
  • Modern farmhouse and transitional homes
  • Kitchens and great rooms with wire brushed floors
  • Rooms with lots of natural light, where the grain shows
  • Covered patios and outdoor rooms

Box shapes and woods

  • 3-sided (U-shape): the most common, mounted against the ceiling
  • 2-sided (L-shape): for beams that meet a wall
  • 4-sided (closed): for beams that hang free or show all sides

Oak, Douglas fir and pine. Other species on request.

How to choose, measure and install

Three numbers per beam: width (W) and height (H) in inches, and length (L) wall to wall.

Box beam order guide: 3-sided, 2-sided and 4-sided styles, how to measure, and how box beams are installed
Box beam surfaces on real Legno reclaimed wood samples: hand hewn, rough sawn, smooth planed, wire brushed and hit or miss

Our wire brushed beams

Oak box beams made in our shop and installed by our crew, plus the brushed texture up close.

Colors for wire brushed beams

There is no limit on color. Wire brushing opens the grain, so stain and whitewash settle into it and the color looks deeper than on a smooth face. Pick a finish below, or send us a floor board, a cabinet door or a photo and we make that color.

Light & whitewash: Whitewashed Hand Sculpted, Vanilla Classic, Douglas Fir Light Grey, Driftwood, Reclaimed Oak Natural · Grey: Hit or Miss Grey Sky, Euro Silver, Driftwood Grey, Douglas Fir Dark Grey, Euro Pewter · Honey & natural: Heart Pine Fresh Sails, Douglas Fir Skip Plane, Douglas Fir Oil, Hand Scraped Douglas Fir, Earthtone Oak · Brown: Spice Oak, Mixed Oak Sienna, Walnut Antique Brown, Coffee Hand Scraped, Stained Ebony Oak · Dark: Chestnut Dark Oil, Walnut with Ebony

Made in our shop, installed by our crew

Every box beam is built to order in our shop, then delivered, shipped or installed by our own crew.

Beam wraps for existing beams

Have a steel, LVL or plain wood beam? We make a wire brushed reclaimed wood wrap that fits around it, so it looks like a solid timber with the grain raised.

How a beam wrap is installed: existing steel beam, wood blocking fastened to the beam, reclaimed wood wrap fastened to the blocking, finished beam

How to order wire brushed box beams

  1. Send your project. Photos of the room, ceiling height, and each beam's width × height (in) and length (ft).
  2. Choose wood, box shape and color.
  3. Ask for a sample to see color and texture first.
  4. Get your quote and lead time.
  5. Delivery, shipping or installation. Southern California delivery, shipping to other states, installation on request.
Box beam layouts for flat, vaulted and coffered ceilings
How to measure a room for box beams

Wire brushed beam quote form

Fill in what you know. Not sure? Choose "Not sure" and we help you plan. We reply with a quote and lead time.








































Wire brushed box beam FAQ

What are wire brushed box beams?

Hollow beams made from reclaimed wood that is planed smooth and then brushed with a wire brush machine to raise the grain. They look like solid timbers but weigh much less.

How is wire brushing done?

After the board is planed, a machine with steel wire brushes runs along the face. It removes the soft wood between the growth rings and leaves the hard grain standing.

What is the difference between wire brushed and smooth planed?

Both start flat. Smooth planed stays smooth to the touch. Wire brushed is brushed after planing, so you can see and feel the grain.

What is the difference between wire brushed and rough sawn?

Rough sawn shows saw marks across the face. Wire brushed is cleaner: the face is flat with only the grain raised.

Do wire brushed beams match a wire brushed floor?

Yes. We can brush and finish the beams to go with a wire brushed floor. Send us a board or a photo and we make a sample.

Are wire brushed box beams structural?

No. Box beams are decorative and are not made to carry weight.

Which woods can I choose?

Oak, Douglas fir and pine. Other species on request.

What colors are available?

Any color. Choose a finish from the chart or we match your floor, cabinets or a photo.

Does stain look different on wire brushed wood?

Yes. The brushed grain holds more stain, so the color looks deeper and the grain stands out. A sample shows you the result before you order.

Can I see a sample first?

Yes. Samples are available on request, and you can see wood at our showroom on S. Vermont Ave in Los Angeles by appointment.

What sizes can you make?

Every beam is made to your measurements. Send width × height in inches and length in feet for each beam.

Can lights or wiring go inside?

Yes. Box beams are hollow, so they can hide wiring or small lights. Tell us when you ask for a quote.

Can you wrap an existing beam?

Yes. We make hollow wire brushed wraps for steel, LVL, plain wood or painted beams.

Do you install the beams?

Installation is available on request. Tell us when you ask for a quote.

Do you ship outside California?

Yes. We deliver across Southern California and ship to other states.

How do I get a quote?

Call (213) 715-5197 or fill in the wire brushed beam quote form on this page.

Wire brushed box beams by wood

Walnut box beams: wire brushed walnut in any length and any color, including bleached walnut to match your floor.

Wire Brushed box beams by color

See wire brushed box beams in each color family, with finish samples and photos: Whitewash · Grey · Natural · Brown · Dark.

Guides: What is a box beam · Rough sawn vs hand hewn · How to measure · Beam wraps · Solid reclaimed beams · Fireplace mantels